Home > products > Plastic Engineering Solutions > Mold flow assist to design Laser printer mold design and plastic injection processing

Mold flow assist to design Laser printer mold design and plastic injection processing

Category:
Plastic Engineering Solutions
Price:
10000 USD
Payment Method:
T/T, L/C,Western Union
Specifications
Injection Weight:
360 G
Injection Rate:
80 Mm/sec
Clamping Force:
650 Ton
Opening Stroke:
430
Type:
Injection Mold
Plastic Type:
Thermoplastic
Style:
Horizontal
Automatic:
Yes
Introduction

DengFeng mold had designed so many kinds of Motormeter mold construction such as Honda, VW, TOYOTA etc.. We are good at this kinds of field.

Detaisl contact: Jacky Qiu: 8613533665622

                             Skype: df mold

One-stop plastic injection molding Details: Jacky Qiu MSN: dfmold@yahoo.com  Differential Shrinkage

This type of shrinkage is often caused by variation in crystalline content and volumetric shrinkage. The following figure shows a thin rib attached to a thick top. In general, the cooling rate of the top will be lower than that of the thin section. The top will have increased crystalline content and therefore, will shrink more and cause the warpage shown.

The following figure (a) shows saddle warping of a centrally gated disk with high shrinkage around the gate. Conversely, if the shrinkage is higher around the outer part of the disk, the resulting warpage may cause the disk to dome, shown in (b).

Differential Cooling

Shrinkage due to differential temperature typically results in bowing of the component, as shown in the figure below. Usually this type of shrinkage is due to poor cooling system design.

While the part is in the mold, temperature differences from one side of the mold to the other cause variations in shrinkage through the thickness of the component. In addition to this, any temperature differences at ejection will cause further warpage as both sides of the part cool to room temperature.

 

Specification:   

Certificates                      

AAA grade credit enterprise, ISO9001, ISO14001, SGS

Quality-guaranteed          

Japanese standard of QC management &  Euramerican standards

Service                             

Designing the mould, CNC processing and other tooling, assemble all mould parts

OEM & ODM service     

Acceptable

Design software                 

UG, PRO-E, CAD, CAXA, etc

Mould base Standard      

LKM , HASCO , DME, etc

Moulds’ steel                     

NAK80, S136(H), 2738, 718&738 and P20 etc

hardness of steel:              

15--60 HRC

cav/core material               

2738,2343,DIN-1,S130,2344,738H,718,8407,S136,NAK80,P20 etc

Cavity                                

Single/multi

Runner                              

Hot/cold

Mould life                          

500,000-1,000,000 shots as you required

Final products’ materials  

ABS, PP, PE, POM, PA6(66)+GF, PC, PMMA HIPS, GPPS etc

Final Products’ colors       

Any color as your required

Lead Time                         

25-50 workdays based on the different products

Relevant requirements reachable 

ROHS, UL, or as requested

Package                             

Wooden case package or follow customers' requirement

Price Terms                      

FOB Shanghai Port, China

Payment term                    

T/T, L/C at sight

Details contact: Jacky Qiu Skype:    df mold

Send RFQ
Stock:
MOQ:
1 SET