Products
NEWS DETAILS
Home > News >
What China’s National Moldmaking Competition Can Teach a Five-Axis Mold Shop
Events
Contact Us
86-18026323239
Contact Now

What China’s National Moldmaking Competition Can Teach a Five-Axis Mold Shop

2026-11-20
Latest company news about What China’s National Moldmaking Competition Can Teach a Five-Axis Mold Shop
A mold insert can match its drawing and still have the gate in the wrong place. If a mold-flow study prompts the designer to move the gate, but the CAM programmer works from an earlier revision, the machine will cut the original location with great precision. The error occurs at the handoff, and a dimensional check against the same outdated drawing can miss it.
 
That is one reason the practical events at China’s sixth national vocational skills competition for moldmakers deserve a closer look. Held November 13–16, 2026, in Changxing, Zhejiang, the competition covered engineering simulation, 3D mold design, process planning and five-axis CNC machining. For a working mold shop, the interesting question is how well the decisions made at each stage survive the trip to the machine.
Following a design change all the way to the cut
The competition assessed mold CAD, engineering analysis (CAE), CAM programming, computer-aided process planning (CAPP) and virtual simulation. Each discipline produced work that could be judged in its own right. On the shop floor, those outputs also have to agree.
 
Consider a cooling channel moved closer to a cavity surface after a thermal analysis. The mold designer updates the solid model. The person planning the drilling operation needs the new channel position, the face from which to drill and the depth. The CAM programmer roughing the cavity needs to know how much steel must remain between the cavity and the channel. All three people are acting on the same design decision, but each needs a different piece of information.
 
A practical check is to pick one recent engineering change and trace it through the released model, setup sheet, NC program and inspection plan. If it takes a call to the original programmer to establish which revision reached the machine, the shop has found a handoff worth fixing.
Where five-axis machining earns its place
The competition used Chinese-developed V-450US vertical five-axis machining centers for its practical machining tasks. The machines support simultaneous five-axis motion. Their use on the competition floor also raises a familiar purchasing question for moldmakers: which parts in our own workload would benefit from the extra rotary axes?
 
A deep cavity insert is a good example. With a vertical tool axis, the holder may foul the cavity wall before the cutter reaches a blend near the bottom. Tilting the insert can open up an approach that accommodates a shorter, stiffer cutter. Where several angled faces share a tight positional tolerance, machining them in one clamping can also remove the variation introduced by setting the insert up again.
 
Some features need only an indexed tool angle. Others, such as a contoured surface where holder clearance changes along the cut, may benefit from simultaneous motion. For a machine trial, choose a familiar insert or a multi-surface electrode and specify what will be measured. Check the finish at the bottom of the cavity, the profile through a blend and the witness line where adjacent passes meet. Those results give a buyer something concrete to set alongside the machine specifications.
Three shop-floor checks drawn from the practical events
1. Give the next shift a setup it can reproduce. The first stage included computer-aided process planning. Its everyday counterpart is the setup sheet. For a five-axis insert, record the locating faces, work offset, fixture orientation, tool assemblies and critical stickout lengths. Ask a machinist on another shift to walk through the setup from that sheet. A question as simple as “Which face goes against the stop?” can expose an assumption that the original programmer never thought to write down.
 
2. Verify the program against the setup that will actually run. Virtual simulation was part of the assessment. Before releasing a five-axis program, check the stock, fixture, clamps, holder geometry and tool lengths against the planned setup. Pay particular attention to retracts and rotary moves between cutting passes. A cutter can clear the finished surface while its holder swings into a clamp during repositioning. Keep the verification record with the program revision it covers, and repeat the affected checks if the shop changes a holder or moves a clamp.
 
3. Collect machine data to answer a specific production question. The second stage included collecting and displaying basic data from an intelligent manufacturing cell. A mold shop can start with one recurring job. If cavity finishing regularly occupies the machine longer than planned, log cutting time, tool changes and interruptions separately. A long finishing pass and a twenty-minute wait for a replacement cutter both extend the cycle, but they call for different fixes.
 
For a shop deciding where to start, one insert is enough. Follow it from the latest design change through programming, setup, machining and inspection. Check whether the machinist received the current geometry, whether the simulated holder matches the one in the spindle, and whether inspection covers the feature that prompted the change. That review gives the team a specific improvement to make before the next insert reaches the machine.
Products
NEWS DETAILS
What China’s National Moldmaking Competition Can Teach a Five-Axis Mold Shop
2026-11-20
Latest company news about What China’s National Moldmaking Competition Can Teach a Five-Axis Mold Shop
A mold insert can match its drawing and still have the gate in the wrong place. If a mold-flow study prompts the designer to move the gate, but the CAM programmer works from an earlier revision, the machine will cut the original location with great precision. The error occurs at the handoff, and a dimensional check against the same outdated drawing can miss it.
 
That is one reason the practical events at China’s sixth national vocational skills competition for moldmakers deserve a closer look. Held November 13–16, 2026, in Changxing, Zhejiang, the competition covered engineering simulation, 3D mold design, process planning and five-axis CNC machining. For a working mold shop, the interesting question is how well the decisions made at each stage survive the trip to the machine.
Following a design change all the way to the cut
The competition assessed mold CAD, engineering analysis (CAE), CAM programming, computer-aided process planning (CAPP) and virtual simulation. Each discipline produced work that could be judged in its own right. On the shop floor, those outputs also have to agree.
 
Consider a cooling channel moved closer to a cavity surface after a thermal analysis. The mold designer updates the solid model. The person planning the drilling operation needs the new channel position, the face from which to drill and the depth. The CAM programmer roughing the cavity needs to know how much steel must remain between the cavity and the channel. All three people are acting on the same design decision, but each needs a different piece of information.
 
A practical check is to pick one recent engineering change and trace it through the released model, setup sheet, NC program and inspection plan. If it takes a call to the original programmer to establish which revision reached the machine, the shop has found a handoff worth fixing.
Where five-axis machining earns its place
The competition used Chinese-developed V-450US vertical five-axis machining centers for its practical machining tasks. The machines support simultaneous five-axis motion. Their use on the competition floor also raises a familiar purchasing question for moldmakers: which parts in our own workload would benefit from the extra rotary axes?
 
A deep cavity insert is a good example. With a vertical tool axis, the holder may foul the cavity wall before the cutter reaches a blend near the bottom. Tilting the insert can open up an approach that accommodates a shorter, stiffer cutter. Where several angled faces share a tight positional tolerance, machining them in one clamping can also remove the variation introduced by setting the insert up again.
 
Some features need only an indexed tool angle. Others, such as a contoured surface where holder clearance changes along the cut, may benefit from simultaneous motion. For a machine trial, choose a familiar insert or a multi-surface electrode and specify what will be measured. Check the finish at the bottom of the cavity, the profile through a blend and the witness line where adjacent passes meet. Those results give a buyer something concrete to set alongside the machine specifications.
Three shop-floor checks drawn from the practical events
1. Give the next shift a setup it can reproduce. The first stage included computer-aided process planning. Its everyday counterpart is the setup sheet. For a five-axis insert, record the locating faces, work offset, fixture orientation, tool assemblies and critical stickout lengths. Ask a machinist on another shift to walk through the setup from that sheet. A question as simple as “Which face goes against the stop?” can expose an assumption that the original programmer never thought to write down.
 
2. Verify the program against the setup that will actually run. Virtual simulation was part of the assessment. Before releasing a five-axis program, check the stock, fixture, clamps, holder geometry and tool lengths against the planned setup. Pay particular attention to retracts and rotary moves between cutting passes. A cutter can clear the finished surface while its holder swings into a clamp during repositioning. Keep the verification record with the program revision it covers, and repeat the affected checks if the shop changes a holder or moves a clamp.
 
3. Collect machine data to answer a specific production question. The second stage included collecting and displaying basic data from an intelligent manufacturing cell. A mold shop can start with one recurring job. If cavity finishing regularly occupies the machine longer than planned, log cutting time, tool changes and interruptions separately. A long finishing pass and a twenty-minute wait for a replacement cutter both extend the cycle, but they call for different fixes.
 
For a shop deciding where to start, one insert is enough. Follow it from the latest design change through programming, setup, machining and inspection. Check whether the machinist received the current geometry, whether the simulated holder matches the one in the spindle, and whether inspection covers the feature that prompted the change. That review gives the team a specific improvement to make before the next insert reaches the machine.