Our Advantage:
1)Various materials and short lead-time;
2)Good steel and long lifetime;
3)We can supply "one-stop" service with moldsopening, injection, painting, screen printing, assembly and nice after-sales service in long term;
4)Full set of machines for mold making, Injection molding machine can meet 3000Ton nearby to test;
5): OEM&ODM service available;
6): Mould's design based on engineering, normally 5 days can finish all documents;
7): Mould's steel as per customers' requests such as NAK80, S1369(H),2738, 718, 738 and etc.;
8): Products' materials' optional: ABS, PP, PE, POM, PA6(66)+GF, PC, PMMA, HIPS, GPPS and etc.;
9): Products' color: As the customer's requirments, any color is possible, if they can provide us the color card schedule;
10): Relevant requirements reachable: ROHS, UL, or as the request;
11): Certifications Authorized: ISO9001&ISO14001 Certificated;
12): Japanese standard of QC management and Euramerican standard of checking;
13): Service scope: Open mould, Injection, CNC processing, coating, screen printing, assembly for finished products and so on;
14): Good cost and high efficiency of delivery;
Our electric frame mould details:
-
Critical to fit and/or function( 18*);
-
Material to be PA757+30% GF, processing must be with in Spec.;
-
Color to be natural, shade is unimportant;
-
Draft to be included in dimensional tolerance;
-
Parts to be supplied from vendor in trays, one part per cell to prevent damage to teeth. Parts must never be placed into bins or bags: they must be kept in trays. One part per cell, until individually removed for assembly.
-
Tolerance indicated applies within dimensions indicated: remainder may be +0.2/-0.03
-
Shape of roots of teeth to be as produced by specified basic rack.
-
If has Gear must to be inspected in area indicated:
-
The highlight surface must be textured as MT11020.
-
No ejector pin mark, gate, flash, scratches or imperfections permissible on surface indicated;
-
Cavity identification mark to be placed on surface indicated
-
Nominal wall thickness is 2.5, part volume is approximately with 3D /actual;
-
Zero draft on textured surface : slide required;
-
Target A(a,a2,a3) B(b1, b2) to be established on highest point;
-
The nominal geometry is established by the wireframe data. The following tolerances with respect to established datums apply unless otherwise specified:
