DF-mold Use Moldflow To Mold Design And Process Feeding System For Automotive Mold
DengFeng mold had designed so many kinds of Motormeter mold construction such as Honda, VW, TOYOTA etc.. We are good at this kinds of field.
one-stop plastic injection molding Details(Differential Shrinkage)
A Warp analysis is used to diagnose the cause of warping and recommend a solution, such as gate location changes, design parameter changes, or reduction of wall thickness variations.
Warp analysis is supported for Mid-plane, Dual Domain and 3D analysis technologies.
Warpage is affected greatly by fiber orientation. Warpage in an injection molded part is caused by variations in shrinkage that occur:
- From region to region in the part.
- Through the thickness of the part.
- Parallel and perpendicular to the direction of material orientation.
Any attempt to predict the likelihood and amount of warpage for a particular component must first account for these shrinkage variations.
The material that is used influences the warpage of the part. Sometimes you must choose a material with low, uniform shrinkage to achieve dimensional accuracy. These materials are usually more expensive, but you may be able to use a cheaper material and save costs by observing shrinkage and warpage design principles.
Note: Differential shrinkage caused by fiber orientation is one of the main causes of warpage.
The Warp analysis uses the results of the Cool analysis and the Fill analysis to predict shrinkage and warpage of the part. Modeling tasks and an analysis sequence must be set up before a Warp analysis is run.
|
Specification: |
|
|
Certificates |
AAA grade credit enterprise, ISO9001, ISO14001, SGS |
|
Quality-guaranteed |
Japanese standard of QC management & Euramerican standards |
|
Service |
Designing the mould, CNC processing and other tooling, assemble all mould parts |
|
OEM & ODM service |
Acceptable |
|
Design software |
UG, PRO-E, CAD, CAXA, etc |
|
Mould base Standard |
LKM , HASCO , DME, etc |
|
Moulds’ steel |
NAK80, S136(H), 2738, 718&738 and P20 etc |
|
hardness of steel: |
15--60 HRC |
|
cav/core material |
2738,2343,DIN-1,S130,2344,738H,718,8407,S136,NAK80,P20 etc |
|
Cavity |
Single/multi |
|
Runner |
Hot/cold |
|
Mould life |
500,000-1,000,000 shots as you required |
|
Final products’ materials |
ABS, PP, PE, POM, PA6(66)+GF, PC, PMMA HIPS, GPPS etc |
|
Final Products’ colors |
Any color as your required |
|
Lead Time |
25-50 workdays based on the different products |
|
Relevant requirements reachable |
ROHS, UL, or as requested |
|
Package |
Wooden case package or follow customers' requirement |
|
Price Terms |
FOB Shanghai Port, China |
|
Payment term |
T/T, L/C at sight |
Moldflow To Mold Design And Process Feeding System For Automotive Mold
Details contact: Jacky Qiu Skype: df mold